MDX-50 Specification Banner

MDX-50 Specifications


Acceptable materials Resins such as chemical wood and modeling wax (metal not supported)
Operating range X: 400 mm (15.80in)
Y: 305 mm (12 in)
Z: 135 mm (5.3 in)
Table size W: 400 mm (15.8 in)
D: 305 mm (12 in)
Loadable workpiece size

X: 400 mm (15.8 in)
Y: 305 mm (12 in)
Z: 100 mm (3.9 in)

Axis drive Stepper Motor
Feed rate XY: 7 to 3600 mm/min
Z: 7 to 3000 mm/min
Software resolution RML-1: 0.001 mm/step NC code: 0.001 mm/step
Mechanical resolution 0.01 mm/step
(0.39 mil/step; half step)
Spindle motor Brushless DC motor
Spindle rotation speed 4500 ~ 15000 rpm
Tool chuck Collet
Tool Change Method AutomaticTool Changer (ATC)
ATC Magazine Capacity
5 Tools + 1 Detection pin (6 Position Capacity)
Tool Shank Diameter 6 mm, 4 mm using ZH-4 tool holder, 3 mm using ZH-3 tool holder
Operating noise During operation
Dust box dimmensions
600 x 700 x 95 mm
Interface USB
Power requirements (VAC/A) AC 100 to 240 V ±10%, 50/60 Hz, 1.2 A
(Overvoltage Category: II, IEC 60664-1)
Power consumption (W) ≈ 95W
Acoustic noise level (dB) No-load operation: 60 dB (A) or less
Standby: 45 dB (A) or less
External Dimensions Width X Depth x Height: 760 × 900 × 732 mm (29.92 × 35.43 × 28.82 in)
Weight 122kg (269lb)
Installation environment Indoor use at altitudes Up to 6500ft (2000 m)
Temperature 5 to 40°C (41 to 104°F)
Humidity 35 to 80%RH (no condensation)
Ambient pollution degree 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage 1440 V
Long-term temporary overvoltage 490 V
Included items Power cord, USB cable, manual, Roland DG Software Package CD, detection
pin, hexagonal screwdriver, hexagonal wrench, wrench, tool holder, tool
positioner, Z0 sensor
Optional ZCL-50A Rotary Axis Unit
Operating range X: 363mm - Machine Coordinates 37 to 400 mm
Y: 305 mm
Z: 125 mm
A: A: ±2,146,680° (approximately ±5963 rotations)
Loadable workpiece size 120 mm - 60 mm maximum radius from center of rotation
Loadable workpiece length 380 mm
Workpiece clamp thickness 10 to 65 mm or
20 to 68 mm Diameter
A axis motor Stepper Motor
Mechanical Resolution 0.0225°/step (half step)
Dimensions Width x Depth x Height: 578 × 190 × 128 mm
Weight 7kg (15.43 lb)
Included Items Detection bar, cap screws, user's manual
System Requirements
OS Windows 10, 8.1, 7 (32- or 64-bit version)*1,*2,*3
CPU Minimum required CPU for the operating system
Memory Minimum amount of required RAM for the operating system
Optical drive CD-ROM drive
Video card and monitor A display with at least 16-bit color and a resolution of 1024 × 768 or more is recommended.

(*1) This software is a 32-bit application and therefore runs in WOW64 (Windows-On-Windows 64) when running on 64-bit versions of Windows operating systems.

(*2) Internet Explorer 8.0 or later is required.

(*3) Operations have not been verified in virtual Windows environments such as Hyper-V and Virtual PC.

Specifications, designs and dimensions listed may be subject to change without notice.