DWX-4 compact dental mill

DWX-4 Specifications


Cuttable Material Zirconia (pre-sintered), Wax, PMMA, Composite resin
Loadablework - piece shape Block 76 (W) × 38 (D) x 10 to 22 (H) mm
PIN type Max. 85 (W) x 40 (D) x 22 (H) mm
Operating speed XYZ axis: 6 to 1800 mm/min. (0.24 to 70.8 in./min.)
Spindle motor Brushless DC motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A: ±360°
Number of tools housed 2
Attachable tool Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air 0.02 to 0.2 MPa
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1)
Control command set RML-1, NC code
Power requirements Voltage and frequency: AC100 to 120 V/220 to 240 V ±10 %, 50/60 Hz

(overvoltage category II, IEC 60664-1)

Required power capacity: 2.0 A (100 to 120 V)/1.0 A (220 to 240 V)
Power consumption Approx. 70 W
Operating noise During operation: 70 dB (A) or less (when not cutting)
During standby: 40 dB (A) or less
External dimensions Width x Depth x Height: 340 (W) × 365 (D) × 405 (H) mm (13.4 × 14.4 × 16.0 in.)
Weight 48.5 lbs (22 kg)
Installation Environment Indoor Use, altitude: up to 2000 m
Temperature: 5 to 40 °C (41 to 104 °F)
Relative humidity: 35 to 80 % (no condensate)
Ambient pollution degree: 2 (as specified by IEC 60664-1)
Short-Term Temporary Overvoltage: 1440 V
Long-Term Temporary Overvoltage: 490 V
Included items Power cable, USB cable, Manual, Software Package CD-ROM, Detection pin, Automatic correction jig, Clamp for block workpiece, Hexagonal screwdriver, spanner, Tool holder, Tool positioner, Dust collection hose, Regulator, etc.

System requirements for USB connection Operating system Windows® 7/8/8.1/10 (32 or 64 bit)
USB cable Use the included USB cable

Specifications, designs and dimensions listed may be subject to change without notice.