DWX-4W wet dental mill

DWX-4W Specifications

Model DWX-4W
Cuttable material Glass ceramics, Composite resin
Loadable workpiece shape Width Max 40 mm (1.57 in.)
Depth Max 20 mm (0.79 in.)
Height Max 20 mm (0.79 in.)
Operating speed 6 to 1800 mm/min. (0.24 to 70.9 in./min.)
Spindle motor Jaeger high frequency spindle
Spindle speed 15000 to 60000 rpm
Rotary axis travel angle A axis ± 360°
Number of burs housed 4
Attachable bur Shank diameter 3 mm dedicated milling bur for wet grinding

Compatible compressed air

(please contact your Roland DG dealer for the appropriate oil free, dry air compressor)

Pressure 0.7 to 1.0 Mpa (101-145psi)
Air Capacity
114L/min (30gal) or more
Tank Capacity
33L (8.7gal) or more
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 to 240 V ± 10%, 50/60 Hz , 1.9 A (overvoltage category II, IEC 60664-1)
Power consumption Approx. 200 W
Operating noise During operation 70 dB (A) or less (when not milling)
During standby 48 dB (A) or less
External dimensions 480 (W) x 538 (D) x 599 (H) mm (18.9 x 21.2 x 23.6 in.)
Weight 53 kg (116.8 lb)
Installation environment Indoor use, Altitude: Up to 2000 m (6562 ft.), Temperature: 5 to 28 ℃ (41 to 82.4 °F), Humidity: 35 to 80 % (no condensation), Ambient pollution degree: 2 (as specified by IEC 60664-1), Short-term temporary overvoltage: 1440 V, Long-term temporary overvoltage: 490 V
Included items Power cable, USB cable, Drain hoses, Detection pin, Dedicated grinding burs, Automatic correction jig, Measuring cup, Hexagonal screwdriver, Hexagonal wrench, Mounting screws, Setup guide, Daily maintenance card, Roland Software Package CD, Spindle maintenance kit

System requirements for USB connection

Operating system (OS)* Windows® 7/8/8.1/10 (32 or 64 bit)
USB cable Use the included USB cable

Specifications, designs and dimensions listed may be subject to change without notice.