DWX-51D 5-axis dental milling machine

DWX-51D Specifications

Cuttable material
Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fibre-reinforced resin
Loadable workpiece shape Disc type (with step) Step section: 98.5 mm (diameter), height 10mm
Body section: 95 mm (diameter), height max. 60mm
Pin type Pin diameter: 6 mm
Operating speed XYZ axis: 6 to 1,800 mm/min.
(0.24 to 70.9 in./min.)
Spindle motor Brushless DC motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A axis ±360°
B axis ±30°
Number of burs housed 10
Attachable bur Shank diameter 4 mm
Length 40 to 55 mm
Compatible compressed air 0.02 to 0.2 MPa
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 to 240 V ± 10%, 50/60 Hz , 2.0 A
(overvoltage category II, IEC 60664-1)
Power consumption Approx. 200 W
Operating noise During operation 70 dB (A) or less (when not cutting)
During standby 45 dB (A) or less
External dimensions Width x Depth x Height 495 × 660 × 600 mm
(19.5 × 26.0 × 23.6 in.)
Weight 67 kg (147.7 lbs.)
Installation environment Indoor use, Altitude Up to 2000 m (6,562 ft.)
Temperature 5 to 40 °C (41 to 104 °F)
Humidity 35 to 80% (no condensation)
Ambient pollution degree

2 (as specified by IEC 60664-1)

Short-term temporary overvoltage 1,440 V
Long-term temporary overvoltage 490 V
Included items Power cord, USB cable, Regulator, Air hose, Pin-type material adapter, Automatic correction jig, Detection pin, Torque screwdriver, Milling bur holders, Mounting screws, Hexagonal screwdriver, T-shaped hexagonal screwdriver, Dust collection hoses, Dust collection hose adapter, spanner, Roland Software Package CD, Torque screwdriver, Ferrite core, Manuals
System requirements for USB connection Operating system Windows® 7/8/8.1/10 (32 or 64 bit)
USB cable Use the included USB cable
Milling Bur Holder Model ZBH-4D Replacement milling bur holder (for DWX-51D, DWX-50, DWX-52DC and DWX-4)
Pin-type material adaptor Model ZV-51D Replacement pin-type material adaptor (for DWX-51D)
Milling Bur Model ZDB-100D R1.0mm 2mm milling bur for composite resin
Milling Bur Model ZDB-50D R0.5mm 1mm milling bur for composite resin
Milling Bur Model ZDB-30D R0.3mm 0.6mm milling bur for composite resin
Milling Bur Model ZCB-100D R1.0mm 2mm milling bur
Milling Bur Model ZCB-50D R0.5mm ⌀1mm milling bur for zirconia, wax, PMMA, PEEK, gypsum, fibre-reinforced composite
Milling Bur Model ZCB-40D R0.4mm ⌀0.8mm milling bur for zirconia, wax, PMMA, PEEK, gypsum, fibre-reinforced composite

Specifications, designs and dimensions listed may be subject to change without notice.