EGX-350 Automated Engraving Machine

EGX-350 Specifications

MODEL EGX-350
Table Size 305 (W) x 230 (D) mm [12 x 9.1 in.]
XYZ-axis travels 305 (X) x 230 (Y) x 40 (Z) mm [12 x 9.1 x 1.6 in.]
XYZ-axis drive system Stepping motor, 3-axis simultaneous control
Operating speed X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec),
Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec)
Software Resolution 0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step)
Mechanical Resolution X and Y axes: 0.0025 mm/step (0.0001 in./step),
Z axis: 0.00125 mm/step (0.0005 in./step)
Spindle Motor Brushless DC motor, max. 50 W
Spindle speed 5,000 to 20,000 rpm
Tool Chuck Cutter holder, collet method
Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)
Loadable workpiece thickness Max. 40 mm (1.6 in.) or 38 mm (1.5 in.) when nose unit is used
Connectivity USB (compliant with Universal Serial Bus Specification Revision 1.1)
or serial (RS-232C-compliant)
Control command set RML-1
Power Requirements AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)
Power consumption 122 W
Acoustic Noise Level During operation: 60 dB (A) or less (when not cutting),
During standby: 40 dB (A) or less (as specified by ISO 7779)
Dimensions 616 (W) x 591 (D) x 393 (H) mm / When cover is open: 598 (W) x 545 (D) x 685 (H) mm
Weight 34 kg (75 lb.)
Environmental Temperature: 5 to 40°C (41 to 104°F),
Humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1)
Accessories Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM, Roland EngraveStudio™ CD-ROM, Roland Software Program Guide, Roland EngraveStudio™ Program Guide, and User's Manual
 
Roland EngraveStudio™ System Requirements
OS A model pre-installed with Windows® 10, 8.1, 7 (32-bit / 64-bit versions) (64-bit version recommended) or an upgraded computer originally pre-installed with Windows® 7 or later
CPU Minimum Pentium® III, 1 GHz or faster recommended
RAM Windows 7 or later: 1GB or more recommended

Specifications, designs and dimensions listed may be subject to change without notice.