SOLJET PRO 4 XR-640 Printer/Cutter

SOLJET PRO 4 XR-640 Accessories

CONSUMABLES

Model Description
 ESL5-CY  ECO-SOL MAX3 Cyan, 220 cc
 ESL5-MG  ECO-SOL MAX3 Magenta, 220 cc
 ESL5-YE  ECO-SOL MAX3 Yellow, 220 cc
 ESL5-BK  ECO-SOL MAX3 Black, 220 cc
 ESL4-WH  ECO-SOL MAX2 White, 220 cc
 ESL4-MT  ECO-SOL MAX2 Metallic, 220 cc
 ESL5-5MG  ECO-SOL MAX3 Magenta, 500 cc
 ESL5-5YE  ECO-SOL MAX3 Yellow, 500 cc
 ESL5-5BK  ECO-SOL MAX3 Black, 500 cc
 ESL5-5LC  ECO-SOL MAX3 Light cyan, 500 cc
 ESL5-5LM  ECO-SOL MAX3 Light magenta, 500 cc
 ESL5-5LK  ECO-SOL MAX3 Light black, 500 cc
 SL-CL  Cleaning liquid cartridge, 220cc, 1pc
 ZEC-U5032  Cemented carbide blade for vinyl, fluorescent and reflective film, offset value 0.25 mm, 2 pcs
 ZEC-U5025  Cemented carbide blade for vinyl, fluorescent and reflective film, offset value 0.25 mm, 5 pcs
 ZEC-U5022  Cemented carbide blade for vinyl film, offset value 0.25 mm, 2 pcs
 ZEC-U1715  Cemented carbide blade for sandblast stencil, offset value 0.25 mm, 5 pcs
 ZEC-U3017  Cemented carbide blade for general signage vinyl, offset value 0.175 mm, 3 pcs
 ZEC-U1005  Cemented carbide blade for vinyl film, offset value 0.25 mm, 5 pcs
 ZEC-U3075  Cemented carbide blade for thick material and sandblast stencil, offset value 0.75 mm, 5 pcs (XD-CH4 Only)(*1)
 ZEC-U3050  Cemented carbide blade for thick material and sandblast stencil, offset value 0.50 mm, 5 pcs (XD-CH4 Only)(*1)
 ZEC-U5010  Cemented carbide blade for window film, offset value 0.5 mm, 2 pcs (XD-CH4 Only)(*1)
 ZEC-U3100  Cemented carbide blade for thick material and sandblast stencil, offset value 1.00 mm, 5 pcs (XD-CH4 Only)(*1)
 XD-CH2  Adjustable depth blade holder, Alloy tip
 XD-CH3  Adjustable depth blade holder, Plastic tip
 XD-CH4  NEW - Adjustable depth blade holder, Alloy tip - Black, Orange, Red
 1000007546
 Creasing tool for cardboard
 DU-640  Optional post dryer for XR-640
 6701409310  Cleaning Kit, 100ml cleaning fluid, 10 swabs
 11849102  Sheet cut blades, 25 pcs

Optional DU-640 heater and blower specifications
Dryer unit Heating type (with blower fan), setting range for the preset temperature: 30 to 55°C (*2)
Power requirements (*3) AC 100 to 120V ±10%, 5 A, 50/60 Hz or AC 220 to 240 V ±10%, 3 A, 50/60 Hz
Power consumption Approx. 650 W
Weight 26 kg
Power on Temperature: 15 to 32°C - (20°C or more recommended), humidity: 35 to 80% (no condensation)
Power off Temperature: 5 to 40°C, humidity: 20 to 80% (no condensation)
Included items Power cord, arms, bushing, cable clamps, stays, hexagonal wrench, bolts, washers, user's manual

*1
XR-640 maximum cutting force is 300g
*2      
Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.       
Depending on the ambient temperature and media width, the preset temperature may fail to be reached.       
*3      
Be sure to connect the machine to an unshared electrical circuit.       
Be sure to verify the amperage of the circuit breaker or fuse used.

 

 

HEATER AND BLOWER UNITS

Get the most out of the SOLJET PRO4 XR series with a heater and blower unit. They dry your projects faster which allows you to produce more.

DU-64 (XR-640)